In daily driving, the correct parking steps are crucial to protecting a car's gearbox and extending vehicle life. However, many drivers may have questions like this: What impact will it have on the vehicle if the engine is turned off without putting in P gear (parking gear)? This article will discuss in detail the possible consequences of this operation.

First of all, direct flameout without putting in P gear may cause the vehicle to move when parking. When the vehicle is not in P gear, the gearbox is not locked, which means the vehicle can still move by external forces such as slopes, wind or human push. This may not be obvious on flat ground, but on slopes, vehicles may slip due to gravity, increasing the risk of collision with surrounding objects.

Secondly, this operation may cause damage to the gearbox. Modern automatic transmissions are designed with a specific parking lock mechanism. When engaged in P gear, a locking pin inserts into the gear inside the transmission, preventing the vehicle from moving. If the vehicle is not put into P gear when the vehicle is turned off, components inside the transmission may be subjected to unnecessary pressure and wear due to the movement of the vehicle, which may lead to premature damage to the transmission in the long run.

In addition, direct flameout without putting in P gear may also affect the vehicle's safety system. Many modern vehicles are equipped with electronic parking brake systems, which are usually linked to the P-gear of the gearbox. If the vehicle is not put into P gear when the vehicle is turned off, the electronic parking brake system may not be activated correctly, thus affecting the safety performance of the vehicle.

In order to more intuitively show the impact of flameout in P gear and not in P gear, the following is a simple comparison table:

Possible effects on operation: The vehicle is stable after putting into P gear and the gearbox is protected. The safety system is working normally. The vehicle may move, the gearbox may be damaged, and the safety system may be affected.

To sum up, in order to ensure the safety of the vehicle and extend its service life, it is recommended that the driver follow the correct steps when parking, that is, first put into P gear and then turn off the vehicle. This is not only responsible for the vehicle, but also for itself andbigbassbonanzamegaways™Performance of safety and responsibility for others.